How To Root Tecno W3 within seconds.

Tecno W3 is one of Tecno’s latest phones from the W series, and runs on Android 6.0 Marshmallow with 8GB of rom and 1GB of ram.We root phones to have full access to the device and also to help us change IMEI easily.This guide will show you how to flash TWRP and root the Tecno W3 successfully. Requirements to root Tecno W3 ▪Download and install VCOM drivers on your PC using this steps ▪SuperSU 2.66.zip ▪TWRP for Tecno W3 ▪Sp flash tool How to Root Tecno W3 Steps 1. Copy SuperSU.zip to both the phone’s SD card and internal storage 2. Download TWRP for Tecno W3 ported by Team Hovatek 3. Now switch off the phone (still with battery inside) 4. Next flash the TWRP recovery.img to the phone using this SP Flash tool 5. Boot the phone into recovery mode using Volume up button + Power button 6. If you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right 7. In TWRP recovery, tap Install 8. Navigate to the location of the SuperSU.zip and select it 9. Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete 10. Reboot the phone normally